However, it is very difficult to acquire the deviation between the electric arc and the weld seam from the welding images because of strong arc disturbance. 由于强烈的弧光干扰,使得从焊接区图像中直接提取电弧与焊缝的偏差信息十分困难。
Application of the Flicker Simulation Method to Electric Arc Furnace Power System 闪变仿真法在电弧炉供电系统中的应用
Voltage feedback control can automatically compensate to the distribution voltage wav and let the welding electric arc stability. 电压反馈控制,对电网电压波动能自动补偿,使焊接电弧稳定。
Research and Application of Electrode Impedance Controller for Electric Arc Furnace 电弧炉电极阻抗控制器的研究与应用
A new analysis method of detecting the molybdenum corrosion-inhibitive drug, copper and aluminum in pure water system for electric arc furnaces ( EAF) with ICP-AES has been developed. 建立了等离子发射色谱法对钼系缓蚀剂和电炉纯水中的铜、铝离子进行联合测定的方法。
Using the high voltage between the two electrodes to breakdown of gas layer, thus generating an electric arc ignition devices. 利用高电压来击穿其两电极之间的气体绝缘层,从而产生电弧的一种电火花点火设备。
High-power graphite electrode is mainly used in high-power electric arc oven of smelting steel. 高功率石墨电极,主要用于炼钢的高功率电弧炉。
Research on Electro-hydraulic Integration Technology for Electrode Lifting System of Electric Arc Furnace 电弧炉电极升降系统机电液一体化技术研究
Electric arc apparatus, hot-spraying, for metals and metal carbides 金属和金属硬质合金热喷涂电弧设备
An electric arc melting-directional solidification techniqueis presented by which the giant magnetostrictive materials of bi-directional crystalline are prepared. 文中对双向定向晶的组织结构和磁致伸缩机制着重进行了讨论。
The reasons for the wreckage of electrodes used in Consteel electric arc furnaces from Italy were analyzed, and suggestions for overcoming the problem were given. 对从意大利引进的康斯迪电弧炉上用电极的折断原因进行了分析,并有针对性地提出了一些解决问题的看法。
The process of flashing involves ionization on the dirty surface concerning the factors of electric, heat and chemicals, thermal dynamic equilibrium process of local electric arc occurrence and development. 污闪是一种与电、和化学因素有关的污秽表面气体电离及局部电弧发生、展的热动力学平衡过程。
Study on the Measurement of the Inside Diameter of the Miniature Metal Halide Lamp's Electric Arc Tube 超小功率金卤灯电弧管泡壳内径测量方法的研究
Blister and refined unwrought copper INVESTIGATION ON TEMPERATURE DISTRIBUTION IN ELECTRIC ARC FURNACE 粗炼的和精炼的未锻铜炼钢电弧炉炉内温度分布规律的研究
In order to assess the flicker caused by electric arc furnace, the simulation method to assess flicker and its application in electric arc furnace power system was studied. 为了仿真评估电弧炉引起的闪变严重度,对闪变仿真法及其在电弧炉供电系统中的应用进行了研究。
20T Electric Arc Furnace and Steel Process Control Analysis and Processing Lag 和钢20T电弧炉过程控制滞后分析及处理
General method and other new technologies of ore smelting electric arc furnace starting-up are introduced. 介绍了矿热炉开炉的一般方法和两种开炉新工艺。
Application of Active Power Filter in the System of Electric Arc Furnace 有源电力滤波器在电弧炉电气系统中的应用
It expoundes basic moving laws of furnace charge and gas from HC FeCr smelting in electric arc furnace. 论述了矿热炉冶炼高碳铬铁炉内炉料和炉气的基本运动规律。
Stable electric arc can be ensured from undercurrent to high current. 从小电流到大电流都可以保持稳定电弧。
The perfectly designed square-wave insures the stableness and concentration of electric arc. 设计理想的方波电源,确保了电弧的稳定和集中。
Such DRI is a high quality charge for electric arc furnace steel making. 该直接还原铁是电炉冶炼优质钢和特殊钢的理想原料。
The electric arc steelmaking process may be divided into the following four stages: charging, melting, refining and tapping. 电弧炉炼钢可以分为以下4个阶段:装料,熔化,精炼和出钢。
This paper makes some simulations on the impaction in power-grids caused by electric arc furnace systems. 针对电弧炉系统对供电网的影响进行了仿真研究。
This article has studied the casting steel single-slag smelting process for electric arc furnace, and discussed in detail the applicable condition and limit of the singleslag smelting process. 对电弧炉铸钢单渣熔炼工艺进行了研究,较为详细地讨论了其工艺适应条件和范围。
Electric arc is mild and centralized, low noise, beautiful welding gap. 电弧柔和集中、噪音小,焊缝成形美观。
Compensation for power supply instability, the electric arc is extremely stable. 具有电网波动补偿,使电弧非常稳定。
Effect on Power Quality and Countermeasure in Case of Integration of Electric Arc Furnace into Power Grid 电弧炉负荷对接入电网电能质量的影响及治理对策
Investigation on temperature distribution in electric arc furnace 炼钢电弧炉炉内温度分布规律的研究
Progress of power supply and control technology for electric arc furnace in abroad 国外电弧炉供电与控制技术的新进展